type of units

Simplex Units:

Single module, Air. A single booster is provided as a stand-alone unit or packaged receiver-mounted system.  Stand-alone units are often applied to actuators [e.g. robotic manipulators], which may require boosted air pressure to transfer and hold a payload at static flow.  Packaged units will provide active air storage for points of use that are more flow dependant, cycle frequently, and require constant supply pressure,+/- 1 psi.

Duplex Units:

Two module, air.  Duplex packages enable booster staging which reduces inlet compressed air consumption by limiting storage restoration to the displacement of a single booster if the reduction of stored energy is maintained within a preset band. (Base load). If the preset band is exceeded the second booster will start [trim]. The trim unit starts against a lower stall pressure than the base load unit thus the combined inlet flow demand is maintained at a lower level than a simplex package of comparable capacity. The lower mechanical losses and reduced inertial forces that characterize smaller displacement boosters further enhance overall power conversion efficiencies.  In addition, the duplex packages provide redundancy for critical production applications.

Triplex Units:

This Triplex booster is a custom designed air operated positive displacement amplifier that boosts air pressure supply to points of use. This air booster package includes three IMP94 booster compressor modules, mounted on a 60 gallon horizontal receiver.

Quad system:

Our Quad System. This custom made booster designed with four IMP94 amplifiers on a PED Certified tank with DAS (Dry Air Spool) for longer life . Operates outdoors in an explosion proof environment.